ESPECIFICACIONES
CPU
Built in with an Intel® Quad-Core Celeron® N5105 SoC (2.0 GHz)
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
4 MB L3 Cache
Memory
2x DDR4 SO-DIMM sockets supporting up to 16 GB of system memory
* If only one memory module is to be installed, be sure to install it in the DDR4_1 socket.
Dual channel memory architecture
Support for DDR4 2933/2666/2400/2133 MHz memory modules
Support for non-ECC memory modules
(Please refer «Memory Support List» for more information.)
Onboard Graphics
Integrated Graphics Processor-Intel® HD Graphics support:
1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz
1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
* Support for HDMI 2.0 version and HDCP 2.3.
1 x DisplayPort, supporting a maximum resolution of 4096×2160@60 Hz
* Support for DisplayPort 1.2 version and HDCP 2.3
(Graphics specifications may vary depending on CPU support.)
Audio
Realtek® Audio CODEC
High Definition Audio
2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE’s website for details on configuring the audio software.
LAN
Realtek® GbE LAN chip (1 Gbps/100 Mbps)
Expansion Slots
1 x PCI Express x1 slot
(The PCI Express x1 slot conforms to PCI Express 3.0 standard.)
Storage Interface
Integrated in the SoC:
1 x SATA 6Gb/s connector
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe 3.0 x2 SSD support)
USB
Integrated in the SoC:
1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Chipset+2 USB 2.0 Hubs:
8 x USB 2.0/1.1 ports (2 ports on the back panel, 6 ports available through the internal USB headers)
Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x SOC fan header
1 x system fan header
1 x SATA 6Gb/s connector
1 x front panel header
1 x front panel audio header
1 x USB 3.2 Gen 1 header
3 x USB 2.0/1.1 headers
1 x serial port header
1 x parallel port header
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
1 x chassis intrusion header
1 x Clear CMOS jumper
1 x buzzer
Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x serial port header
1 x D-Sub port
1 x HDMI 2.0 port
1 x DisplayPort
2 x USB 3.2 Gen 1 ports
1 x USB 3.2 Gen 2 Type-A port (red)
2 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks
I/O Controller
iTE® I/O Controller Chip
